diy better your backyard - all in one solar street light

Tomato cage side table: highlight the bottom 4 nails on the tomato cage;
Putting them out will help the cage sit on the ground better.
This will be the bottom and legs of your table.
Apply the tomato cage to the color you like, and then let the cage dry.
To get on the desktop, look for pre-
Cut wood wheels in your hardware store.
The wheel has a variety of sizes, so choose a wheel that is large enough to cover the top of the tomato cage.
Draw in the color you choose, and then let the circle dry.
Place the circle on the tomato cage, fix it with 4 lens clips, and twist it in place with a drill bit.
What do you need :-
Solid tomato cagePaint-Large pre-
Round wooden cut4 mirror clips-4 screws-
Drill solar lights in indoor lights: bring one of your indoor lights out.
Hide the wires on the lamp with tape.
The lampshade needs to be pure color or light color.
Take out the indoor light bulb and replace it with a solar light full of electricity.
Once it's dark outside, the solar light will turn on and the light will turn on.
Don't use it if it rains.
What do you need :-Indoor lamp-
Solar light Pallet Bar: use 2 wooden pallets that can be found outside the grocery store or large storebox stores. Cut a 1-inch by 3-
The hardware store has 4 inch strips.
Using the drill bit, connect 2 pallets using 4 wooden strips.
Apply the color palette in any color you like and let them dry.
Use cement glue to attach 3 paving stones to it.
What do you need :-
2 wooden pallets-1-inch by 3-
Inch long barDrill-4 to 8 screws-Paint-
3 paving stones-